| Debugging Tools for Windows |
Endpoint information is displayed by the !rpcexts.getendpointinfo extension, or by DbgRpc when the -e switch is used.
If an endpoint number is specified, information about that endpoint is shown. If it is omitted, the endpoints for all processes on the system are displayed.
The following example displays all endpoints. This is often a useful way to obtain process IDs and cell numbers that can be used as arguments for additional commands:
Searching for endpoint info ...
PID CELL ID ST PROTSEQ ENDPOINT
-------------------------------------------------------
00a8 0000.0001 01 NMP \PIPE\InitShutdown
00a8 0000.0003 01 NMP \PIPE\SfcApi
00a8 0000.0004 01 NMP \PIPE\ProfMapApi
00a8 0000.0007 01 NMP \pipe\winlogonrpc
00a8 0000.0008 01 LRPC OLE5
00c4 0000.0001 01 LRPC ntsvcs
00c4 0000.0003 01 NMP \PIPE\ntsvcs
00c4 0000.0008 01 NMP \PIPE\scerpc
00d0 0000.0001 01 NMP \PIPE\lsass
00d0 0000.0004 01 NMP \pipe\WMIEP_d0
00d0 0000.000b 01 NMP \PIPE\POLICYAGENT
00d0 0000.000c 01 LRPC policyagent
0170 0000.0001 01 LRPC epmapper
0170 0000.0003 01 TCP 135
0170 0000.0005 01 SPX 34280
0170 0000.0006 01 NB 135
0170 0000.0007 01 NB 135
0170 0000.000b 01 NMP \pipe\epmapper
01b8 0000.0001 01 NMP \pipe\spoolss
01b8 0000.0003 01 LRPC spoolss
01b8 0000.0007 01 LRPC OLE7
00ec 0000.0001 01 LRPC OLE2
00ec 0000.0003 01 LRPC senssvc
00ec 0000.0007 01 NMP \pipe\tapsrv
00ec 0000.0008 01 LRPC tapsrvlpc
00ec 0000.000c 01 NMP \PIPE\ROUTER
00ec 0000.0010 01 NMP \pipe\WMIEP_ec
0214 0000.0001 01 NMP \PIPE\winreg
022c 0000.0001 01 LRPC LRPC0000022c.00000001
022c 0000.0003 01 TCP 1058
022c 0000.0005 01 SPX 24576
022c 0000.0006 01 NMP \PIPE\atsvc
02a8 0000.0001 01 LRPC OLE3
0370 0000.0001 01 LRPC OLE9
0278 0000.0001 01 TCP 1120
030c 0000.0001 01 LRPC OLE12
For details on the optional parameters, see DbgRpc Command-Line Options.
For a similar example using the RPC debugger extensions, see !rpcexts.getendpointinfo.